™← All treatments3-in-1 framing protection
2200
Whole-frame protection begins before the first wall is raised.
The foundational green RezWood™ treatment for dimensional framing—factory-applied protection against mold growth, fungal decay, and subterranean termites, including Formosan termites, without changing the way crews frame.
2200
Explore 2200
Start with what it does.
Then verify the details.
Select the protection, certifications, technical fit, and warranty information for this treatment. Public-facing standards are included; controlled report identifiers and proprietary formulation details are not.
Purpose + applications
The everyday protection system.
Protection should not stop at one plate or one vulnerable detail. RezWood™ 2200 creates a broader material strategy for the ordinary framing members that make up a building, helping protect the wood during construction and long after the finishes go on.
Protect more of the frame
2200 is designed for a whole-frame approach—from plates and studs to joists and rafters—within the documented use conditions for the selected lumber and application.
Frame with familiar material
The treatment permanently impregnates the wood without incising it. The current third-party evaluation states that allowable design stresses for dry-use conditions remain the same as the wood product before treatment. Request the Report through TechWood’s controlled technical-document process.
Use the right exposure detail
2200 covers UC1, UC2, and protected UC3A conditions. Exterior use must be protected from direct wetting and detailed with the required coating, flashing, drainage, and maintenance.
Common applications
Wall studs and platesFloor joistsRafters and roof framingSill platesDimensional framing packagesProtected exterior trim and millwork when finished as required
Product-specific protection
Protection built into 2200.
The protection below applies to the treated lumber—not every material in the building—and only within the selected product's documented scope.
Mold-growth inhibition
Helps inhibit mold growth on the treated lumber. Moisture management, drying, and jobsite housekeeping still matter. The public technical evaluation documents mold-growth-inhibition testing using ASTM D3273 and ASTM D5590 methods.
Fungal-decay resistance
Resists decay fungi within the documented exposure conditions. It does not replace flashing, drainage, ventilation, or maintenance. The public technical evaluation documents fungal-decay resistance for the approved lumber, application, and above-ground exposure scope.
Subterranean-termite resistance, including Formosan termites
Resists subterranean termites, including Formosan termites, within the current product scope. Untreated wood and cellulose remain outside the protection package. The public technical evaluation documents subterranean-termite resistance for eligible treated lumber within the approved application and exposure scope.
Important context
Conventional pressure-treated lumber can also provide decay and insect resistance, and some products are specifically tagged for ground contact. RezWood 2200 is differentiated by its documented whole-frame package of mold-growth inhibition, decay resistance, insect resistance, low-emissions certification, and familiar dry-use framing performance within its approved exposures.
Public technical record
The proof that can be shared.
This summary identifies the public standards, certifications, and application limits that help a project team evaluate the treatment. Evaluation-report identifiers, formulation details, concentrations, and proprietary process information are intentionally excluded.
GREENGUARD Certified for low emissions
The supplied certification covers the finished 2200 system tested with wood under UL 2818 for low chemical emissions.
Third-party evaluated applications
Independent technical evaluation supports approved building-code applications and the documented preservative-performance claims without exposing proprietary formulation details.
Reaction-with-metals testing
AWPA E12 testing is included in the technical evaluation. Fasteners and connectors must still follow the exposure, building code, and hardware manufacturer's requirements.
Defined use categories
Evaluated for UC1, UC2, and protected UC3A conditions. RezWood 2200 is not represented as a ground-contact treatment.
Important context
Technical fit: UC1, UC2, and protected UC3A conditions. The TechWood evaluation covers multiple solid-sawn and engineered substrates. Texas Wood Tech currently offers RezWood™ in common dimensional lumber sizes; panel products, large beams, and truss programs are not part of the present offering.
Eligible project coverage
Coverage matched to the treatment.
Eligible RezWood™ 2200 projects may include the coverage below, subject to the complete current written terms.
Before framing · 4 months · Covered, elevated jobsite storage
Eligible projects may include coverage while the lumber is stored before framing begins, provided the package is properly covered, elevated, and handled under the written requirements.
During construction · Up to 6 months · Vertical framing exposure
Eligible projects may include coverage while installed vertical framing remains exposed during construction. Drainage, drying, housekeeping, and the documented exposure conditions still matter.
After construction · 5 years · Mold
Eligible projects may include limited protection against mold growth on the treated lumber. Coverage does not replace moisture control, ventilation, leak repair, or normal building maintenance.
Long-term protection · 10 years · Subterranean termite damage
Eligible projects may include limited protection for damage from the termite species named in the written warranty, including subterranean and Formosan termites. Untreated wood, cellulose, and conditions outside the documented application remain outside the coverage.
Long-term protection · 10 years · Fungal decay
Eligible projects may include limited protection against fungal decay of the treated lumber within the approved exposure and application. Good flashing, drainage, ventilation, and maintenance remain required.
Important context
See complete warranty options ↗Coverage depends on the selected product, documented application, registration, treatment record, installation, maintenance, exclusions, and complete current written warranty.
01What it does
The everyday protection system.
Protection should not stop at one plate or one vulnerable detail. RezWood™ 2200 creates a broader material strategy for the ordinary framing members that make up a building, helping protect the wood during construction and long after the finishes go on.
Protect more of the frame
2200 is designed for a whole-frame approach—from plates and studs to joists and rafters—within the documented use conditions for the selected lumber and application.
Frame with familiar material
The treatment permanently impregnates the wood without incising it. The current third-party evaluation states that allowable design stresses for dry-use conditions remain the same as the wood product before treatment. Request the Report through TechWood’s controlled technical-document process.
Use the right exposure detail
2200 covers UC1, UC2, and protected UC3A conditions. Exterior use must be protected from direct wetting and detailed with the required coating, flashing, drainage, and maintenance.
Wall studs and platesFloor joistsRafters and roof framingSill platesDimensional framing packagesProtected exterior trim and millwork when finished as required
02What we protect against
Protection built into 2200.
The protection below applies to the treated lumber—not every material in the building—and only within the selected product's documented scope.
Mold-growth inhibition
Helps inhibit mold growth on the treated lumber. Moisture management, drying, and jobsite housekeeping still matter. The public technical evaluation documents mold-growth-inhibition testing using ASTM D3273 and ASTM D5590 methods.
Fungal-decay resistance
Resists decay fungi within the documented exposure conditions. It does not replace flashing, drainage, ventilation, or maintenance. The public technical evaluation documents fungal-decay resistance for the approved lumber, application, and above-ground exposure scope.
Subterranean-termite resistance, including Formosan termites
Resists subterranean termites, including Formosan termites, within the current product scope. Untreated wood and cellulose remain outside the protection package. The public technical evaluation documents subterranean-termite resistance for eligible treated lumber within the approved application and exposure scope.
Important context
Conventional pressure-treated lumber can also provide decay and insect resistance, and some products are specifically tagged for ground contact. RezWood 2200 is differentiated by its documented whole-frame package of mold-growth inhibition, decay resistance, insect resistance, low-emissions certification, and familiar dry-use framing performance within its approved exposures.
03Certifications + fit
The proof that can be shared.
This summary identifies the public standards, certifications, and application limits that help a project team evaluate the treatment. Evaluation-report identifiers, formulation details, concentrations, and proprietary process information are intentionally excluded.
GREENGUARD Certified for low emissions
The supplied certification covers the finished 2200 system tested with wood under UL 2818 for low chemical emissions.
Third-party evaluated applications
Independent technical evaluation supports approved building-code applications and the documented preservative-performance claims without exposing proprietary formulation details.
Reaction-with-metals testing
AWPA E12 testing is included in the technical evaluation. Fasteners and connectors must still follow the exposure, building code, and hardware manufacturer's requirements.
Defined use categories
Evaluated for UC1, UC2, and protected UC3A conditions. RezWood 2200 is not represented as a ground-contact treatment.
Important context
Technical fit: UC1, UC2, and protected UC3A conditions. The TechWood evaluation covers multiple solid-sawn and engineered substrates. Texas Wood Tech currently offers RezWood™ in common dimensional lumber sizes; panel products, large beams, and truss programs are not part of the present offering.
04Warranties
Coverage matched to the treatment.
Eligible RezWood™ 2200 projects may include the coverage below, subject to the complete current written terms.
Before framing · 4 months · Covered, elevated jobsite storage
Eligible projects may include coverage while the lumber is stored before framing begins, provided the package is properly covered, elevated, and handled under the written requirements.
During construction · Up to 6 months · Vertical framing exposure
Eligible projects may include coverage while installed vertical framing remains exposed during construction. Drainage, drying, housekeeping, and the documented exposure conditions still matter.
After construction · 5 years · Mold
Eligible projects may include limited protection against mold growth on the treated lumber. Coverage does not replace moisture control, ventilation, leak repair, or normal building maintenance.
Long-term protection · 10 years · Subterranean termite damage
Eligible projects may include limited protection for damage from the termite species named in the written warranty, including subterranean and Formosan termites. Untreated wood, cellulose, and conditions outside the documented application remain outside the coverage.
Long-term protection · 10 years · Fungal decay
Eligible projects may include limited protection against fungal decay of the treated lumber within the approved exposure and application. Good flashing, drainage, ventilation, and maintenance remain required.
Important context
See complete warranty options ↗Coverage depends on the selected product, documented application, registration, treatment record, installation, maintenance, exclusions, and complete current written warranty.
Technical clarity
Know exactly what
you are specifying.
Current RezWood™ availability
The TechWood evaluation covers multiple solid-sawn and engineered substrates. Texas Wood Tech currently offers RezWood™ in common dimensional lumber sizes; panel products, large beams, and truss programs are not part of the present offering.
Water-based, mineral-centered protection
RezWood™ uses a custom water-based, mineral-centered wood-treatment blend; formulation details, ingredient concentrations, and process controls remain proprietary. The technical evaluations include AWPA E12 reaction-with-metals testing, while fastener selection still follows the exact treatment, exposure, building code, and connector manufacturer’s guidance. RezWood™ 2200 is represented by supplied certification for a system tested with wood under UL 2818 for low chemical emissions. After treatment migration and full drying, company-approved language describes the finished treated wood as non-hazardous for normal construction handling. Cutting any lumber creates wood dust, so use appropriate dust control, eye protection, hygiene, and job-specific PPE. Never burn treated wood; reuse and disposal depend on local rules and facility acceptance.
Third-party evaluationControlled technical documentRequest the Report ↗